Post Top Ad

Sunday, July 28, 2024

on video VFD working, Run 3-phase motor on 1-phase supply with VFD, variable frequency drive


 VFD working, Run 3-phase motor on 1-phase supply with VFD, variable frequency drive

Absolutely wanting to install three-phase at home, on the network or independently because of a motor, a tool or three-phase ventilation, it is expensive (often thousands of euros) and sometimes not the best solution.

here one of the solutions is the speed variator.

Useful for wood lathes, fans, sanders, saws, augers, mixers, or any other tool that is not too powerful to start.

to be tested on pumps, compressors and heat pumps. Please note, it is not possible to power the product control cards with a variator, this is ONLY for the motor which is not equipped with another starting system (star-delta, resistive, etc.)!

hello friends and welcome to my electricity autonomy channel, today I will show you in this video the connection of a three-phase 400v motor into a single-phase 220v with a frequency variator and voltage booster, input into 230v single-phase and output 380v three-phase for operate all machines with a 380v three-phase motor without changing anything, neither wiring nor motor...just plug it into the frequency variator

hello everyone, today I am explaining to you how to install a frequency variator on a jointer and planer to go from 230V single phase to 380V three phase but you can install it on any three phase machine, in this video I explain to you why, how to choose your dimmer, how to connect it and how to configure it, once again I hope that my explanation will be useful to you and as usual if you have the slightest question, comment or even advice, don't hesitate to ask . thank you for reading and watching until the next time Ciao. I AM NOT SPONCORISED


 VFD working, Run 3-phase motor on 1-phase supply with VFD, variable frequency drive

Absolutely wanting to install three-phase at home, on the network or independently because of a motor, a tool or three-phase ventilation, it is expensive (often thousands of euros) and sometimes not the best solution.

here one of the solutions is the speed variator.

Useful for wood lathes, fans, sanders, saws, augers, mixers, or any other tool that is not too powerful to start.

to be tested on pumps, compressors and heat pumps. Please note, it is not possible to power the product control cards with a variator, this is ONLY for the motor which is not equipped with another starting system (star-delta, resistive, etc.)!

hello friends and welcome to my electricity autonomy channel, today I will show you in this video the connection of a three-phase 400v motor into a single-phase 220v with a frequency variator and voltage booster, input into 230v single-phase and output 380v three-phase for operate all machines with a 380v three-phase motor without changing anything, neither wiring nor motor...just plug it into the frequency variator

hello everyone, today I am explaining to you how to install a frequency variator on a jointer and planer to go from 230V single phase to 380V three phase but you can install it on any three phase machine, in this video I explain to you why, how to choose your dimmer, how to connect it and how to configure it, once again I hope that my explanation will be useful to you and as usual if you have the slightest question, comment or even advice, don't hesitate to ask . thank you for reading and watching until the next time Ciao. I AM NOT SPONCORISED

No comments:

Post a Comment

Post Top Ad

Pages