Post Top Ad

Sunday, June 23, 2024

on video Auto volt Convert #220v ac to DC 3v.6v.12v.24v.48v.60v.84v.72v.120v Dc multi output 5A converter


 Auto volt Convert #220v ac to DC 3v.6v.12v.24v.48v.60v.84v.72v.120v Dc multi output 5A converter

This circuit uses a direct power source that is not isolated from the mains, only people who are knowledgeable about electricity or have electrical protection knowledge should apply this circuit.

An AC to DC converter circuit does exactly as its name implies: it takes a harmonic AC input and converts it to a DC output. These circuits are simply from a high level and when operating at low power on a breadboard, but a real AC to DC converter circuit is more complex than just a transformer and rectifier circuit.

DC converter without transformer Please note, this circuit is not isolated from mains so don’t touch any open wire in this circuit when the circuit is plugged in. It will be dangerous for you if you do not have any knowledge about electronics and electrical engineering.


If you want to increase the brightness of the led use 30W,40W & high led and 47uf ceramic capacitor in place of 15uf. This capacitor must be rated 400v or above.


 Auto volt Convert #220v ac to DC 3v.6v.12v.24v.48v.60v.84v.72v.120v Dc multi output 5A converter

This circuit uses a direct power source that is not isolated from the mains, only people who are knowledgeable about electricity or have electrical protection knowledge should apply this circuit.

An AC to DC converter circuit does exactly as its name implies: it takes a harmonic AC input and converts it to a DC output. These circuits are simply from a high level and when operating at low power on a breadboard, but a real AC to DC converter circuit is more complex than just a transformer and rectifier circuit.

DC converter without transformer Please note, this circuit is not isolated from mains so don’t touch any open wire in this circuit when the circuit is plugged in. It will be dangerous for you if you do not have any knowledge about electronics and electrical engineering.


If you want to increase the brightness of the led use 30W,40W & high led and 47uf ceramic capacitor in place of 15uf. This capacitor must be rated 400v or above.

No comments:

Post a Comment

Post Top Ad

Pages