Transform a broken surveillance camera into a powerful 200V surge circuit
Turn a broken surveillance camera into a powerful 200V surge circuit
If you have a broken surveillance camera, you can turn it into a powerful 200V surge circuit! This is a simple and easy project that you can complete in just a few minutes.
This project is perfect for security cameras that have been damaged or lost power. By turning your broken surveillance camera into a surge circuit, you will be able to restore power to your camera and make it work! This is a great project for DIYers and hobbyists, and is a great way to carry out repair or improvement work. So don't wait any longer, turn your broken surveillance camera into a powerful 200V surge circuit today!
The CE-SPD is an inline surge protection device designed to protect coax based CCTV installations from inductive power surges caused by an indirect lightning strike, blown transformers, and other factors.
The CE-SPD offers 20kA of surge protection for protecting cameras, DVRs, and other coax based CCTV equipment from over voltage conditions.
To install, connect the surge protector inline with the green lock icon closest to the device you wish to protect. For added surge protection, use a second surge protector on the opposite end of the cable run.
The CE-SPD supports both Digital and Analog Signals, comes in a rugged aluminum housing, features a ground wire, and is a passive device.
Transform a broken surveillance camera into a powerful 200V surge circuit
Turn a broken surveillance camera into a powerful 200V surge circuit
If you have a broken surveillance camera, you can turn it into a powerful 200V surge circuit! This is a simple and easy project that you can complete in just a few minutes.
This project is perfect for security cameras that have been damaged or lost power. By turning your broken surveillance camera into a surge circuit, you will be able to restore power to your camera and make it work! This is a great project for DIYers and hobbyists, and is a great way to carry out repair or improvement work. So don't wait any longer, turn your broken surveillance camera into a powerful 200V surge circuit today!
The CE-SPD is an inline surge protection device designed to protect coax based CCTV installations from inductive power surges caused by an indirect lightning strike, blown transformers, and other factors.
The CE-SPD offers 20kA of surge protection for protecting cameras, DVRs, and other coax based CCTV equipment from over voltage conditions.
To install, connect the surge protector inline with the green lock icon closest to the device you wish to protect. For added surge protection, use a second surge protector on the opposite end of the cable run.
The CE-SPD supports both Digital and Analog Signals, comes in a rugged aluminum housing, features a ground wire, and is a passive device.
No comments:
Post a Comment