Alternate power supply 12V 90A with 1000W electric generator
1**Introduction and Equipment Setup**:
- Introduction to the episode and its purpose.
- Description of the equipment needed, such as a car alternator, a 12V battery, soldering tools, paper tape, DC clamp meter, multimeter, bulb, spring, etc.
2**Battery Excitation**:
- Explanation of the need for battery excitation to power up the rotor or field winding.
- Instructions on connecting the battery to the alternator for excitation.
- Testing the connection to ensure functionality.
3**Connection of Output Wires**:
-Guidance on connecting output wires from the alternator, emphasizing the need for thick wires due to high amperage.
- Description of connecting the positive output wire to the main positive screw on the alternator and connecting the negative wire to the alternator's body.
4**Power Generation Testing**:
- Instructions for testing the alternator's power generation capability using a multimeter and a load (bulb).
- Testing under various conditions, including hand rotation, rope rotation, short circuit conditions, and increasing RPM.
- Demonstrating the generation of electricity and measuring voltage and current output.
5. **Further Testing and Adjustments**:
- Additional testing with different loads such as car and motorcycle bulbs.
- Experimentation with short-circuit conditions using a spring.
- Attempting to optimize performance by adding another belt in parallel to the pulley.
6**Conclusion and Future Plans**:
- Summary of the testing results and observations.
- Announcement of future plans for the channel, focusing on alternator and generator-related content.
- Introduction of additional channels and a membership page for deeper engagement with viewers.
Alternate power supply 12V 90A with 1000W electric generator
1**Introduction and Equipment Setup**:
- Introduction to the episode and its purpose.
- Description of the equipment needed, such as a car alternator, a 12V battery, soldering tools, paper tape, DC clamp meter, multimeter, bulb, spring, etc.
2**Battery Excitation**:
- Explanation of the need for battery excitation to power up the rotor or field winding.
- Instructions on connecting the battery to the alternator for excitation.
- Testing the connection to ensure functionality.
3**Connection of Output Wires**:
-Guidance on connecting output wires from the alternator, emphasizing the need for thick wires due to high amperage.
- Description of connecting the positive output wire to the main positive screw on the alternator and connecting the negative wire to the alternator's body.
4**Power Generation Testing**:
- Instructions for testing the alternator's power generation capability using a multimeter and a load (bulb).
- Testing under various conditions, including hand rotation, rope rotation, short circuit conditions, and increasing RPM.
- Demonstrating the generation of electricity and measuring voltage and current output.
5. **Further Testing and Adjustments**:
- Additional testing with different loads such as car and motorcycle bulbs.
- Experimentation with short-circuit conditions using a spring.
- Attempting to optimize performance by adding another belt in parallel to the pulley.
6**Conclusion and Future Plans**:
- Summary of the testing results and observations.
- Announcement of future plans for the channel, focusing on alternator and generator-related content.
- Introduction of additional channels and a membership page for deeper engagement with viewers.
No comments:
Post a Comment