Post Top Ad

Thursday, May 16, 2024

8Pin Auxiliary Relay Connection | 220Vac Auxiliary Relay Hold Unhold With Push Button


 8Pin Auxiliary Relay Connection | 220Vac Auxiliary Relay Hold Unhold With Push Button

This video will show you how to make a latching circuit or an on/off switch with a contactor or relay. With a latching circuit, the contacts will remain on once input power is applied and will remain on until the connection is broken. For this set up you will need a contactor, auxiliary contact, normally open pushbutton switch and a normally closed pushbutton switch. A relay can be used in place of a contactor as long as there is an auxiliary contact that will close when the coil is actuated.

Don't forget to like and comment on this video, and subscribe to our channel!


Galco is a Factory Authorized Stocking Distributor for Over 150 Brands of Industrial Electrical & Electronic Automation, Controls and Component Products; On-Site and Send-In Repair Services for Industrial Control & Automation Products for Over 2,000 Brands; Engineered Systems Integration, Retrofits & Upgrades for Variable Speed Drives, CNC, PLC Systems, Dynamometers & Test Stand Applications.

With respect to the usage, installation or assembly of any products described in this video, Galco Industrial Electronics, Inc., a Michigan corporation, encourages you to follow the requirements and/or guidelines of: i) the Occupational Safety and Health Act of 1970 , Public Law 91-596, as amended, and all laws, rules and regulations implemented in relation thereto; ii) the National Electrical Code®; and iii) NFPA 70E®. Any installation, assembly or work described in this video should be performed by a qualified licensed electrician.


 8Pin Auxiliary Relay Connection | 220Vac Auxiliary Relay Hold Unhold With Push Button

This video will show you how to make a latching circuit or an on/off switch with a contactor or relay. With a latching circuit, the contacts will remain on once input power is applied and will remain on until the connection is broken. For this set up you will need a contactor, auxiliary contact, normally open pushbutton switch and a normally closed pushbutton switch. A relay can be used in place of a contactor as long as there is an auxiliary contact that will close when the coil is actuated.

Don't forget to like and comment on this video, and subscribe to our channel!


Galco is a Factory Authorized Stocking Distributor for Over 150 Brands of Industrial Electrical & Electronic Automation, Controls and Component Products; On-Site and Send-In Repair Services for Industrial Control & Automation Products for Over 2,000 Brands; Engineered Systems Integration, Retrofits & Upgrades for Variable Speed Drives, CNC, PLC Systems, Dynamometers & Test Stand Applications.

With respect to the usage, installation or assembly of any products described in this video, Galco Industrial Electronics, Inc., a Michigan corporation, encourages you to follow the requirements and/or guidelines of: i) the Occupational Safety and Health Act of 1970 , Public Law 91-596, as amended, and all laws, rules and regulations implemented in relation thereto; ii) the National Electrical Code®; and iii) NFPA 70E®. Any installation, assembly or work described in this video should be performed by a qualified licensed electrician.

No comments:

Post a Comment

Post Top Ad

Pages