Top 10 electronics projects for beginners 2024
If your wanting to get into electronics and need a place to start this instructable is for you. There are a number of very cheap kits on eBay and Aliexpress that you can get for 2 or 3 dollars which can give you some experience in component identification, soldering and fault finding. Some of the kits are better than others and they don't come with instructions, but the PCBs are usually well labeled, so you don't really need a step by step guide to assembling the circuits.
Learning Intentions and Success Criteria
Learning Intentions
To work safely in the workshop.
To research electronics and understand basic electronic circuits and components.
To operate a multimeter, soldering iron and hand tools.
To build and fault find simple electronic kits
To be a self-directed learner.
Success criteria
I understand the safety rules and I am working safely in the workshop.
I can follow the instructions independently.
I can produce a number of kit projects
I can safely use a soldering iron to solder PCBs correctly
I can find and repair a non-functioning circuit.
I can operate a multimeter, using the correct settings and measurement units.
Before you start it is very important that you be able to identify electronic components and understand if they are polarity sensitive and know how to read component values. You will also have to have good soldering skills, as many of the pins are very close together and poor soldering will ruin your project very quickly.
If you solder a component in the wrong place or around the wrong way your project will likely not work, or your component could be damaged.
Research can easily be done with a google search, here are some names to get you started. Draw up a grid in your folio with a row for each of the following
Resistor
capacitor
Transistor
PCB
IC. (555) (4017)
Microcontroller (1704)
IC socket
Switch
Trimpot
LDR
Inductor
Microphone.
Diode
Zener diode
In your grid, you need 5 columns for each of the following.
Name of component
photo
symbol
A brief description of how to read the components value.
Is it polarity sensitive, how can you tell which way around it fits into the PCB
You also need to think about making a case or cover for your project, this can be easily done with a laser cutter or 3D printer and a bit of thought. Check out my other Instructables which will show you how to use the laser cutter and 3d printer, and there are some examples of student case designs in the photos.
A good way to learn to solder is practicing on a piece of Vero board and some header pins.
Tips for well-soldered joins are.
Make sure the soldering iron is clean, melt a little solder on the tip and clean off with a wet sponge.
Soldering iron need to be up to temperature before you start. Use proper resin core 60/40 electrical solder. (Lead-free solder can be difficult to work with)
Heat the pad and the wire with the soldering iron Bring the solder in from the opposite side of the iron Melt the solder onto the pad and wire.
Avoid putting the solder directly on the soldering iron when soldering
Lots of practice.
Cut the excess wire after you have soldered a number of components in.
Always use sharp side cutters, and never pull or twist the wire to snap it off, the PCB can be easily damaged.
It is usually best to start with the components that will sit low on the PCB first and fit the tallest components last.
Start with the resistors, and either use a resistor color code chart or multi-meter to check the resistance value before fitting them to the board.
For some reason, many of my students get this wrong and end up with resistors in the wrong location, which can be very difficult to repair.
All the circuit board are very well labeled just keep an eye out for similar looking markings. eg 22K, 22R and 2K2 are NOT the same things. Also, some board are board may use a decimal point eg 2.2K and 2K2 are the same.
The LEDs can also be Labeled in different ways, so make sure you fit them the correct way around. They may have a + or - a diode symbol or a circle with a flat.
A flip-flop circuit is a basis for all sorts of electronic circuits, this one flashes two LEDs alternately. Its the perfect for your first project and can be modified to make the LEDs flash faster or slower. You could use the finished project for a model railway crossing, or tail light for a bicycle.
You will also need a battery and it will work with 3-9 volts
Parts List
2x LEDs
4x Resistors 2x 470R 2x10K
2x Capacitors 47uf
2x Transistors 9014
PCB
It also comes with a circuit diagram, but it's in Chinese and hard to read.
Photos show a simple laser-cut case, and a button cell and laser-cut switch were used to keep the size small. The laser-cut cases will be the subject for my next instructable
Unfortunately, the flip flop shown in the previous step has disappeared off the face of the earth, I can only assume that they are no longer produced.
The Sound activated LED her, Is a great beginner project, it has a microphone, and when there is a sound it flashes 5 super bright LED.
It only has a few components and is very easy to build and get working. You will also need a battery and it will work with 3-6 volts
Parts list
5x LEDs
3x Resistors 1M, 10K, 4.7K
2x 9014 transistors
2x capacitors 47uf, 1uf
1x Microphone
PCB
plug and wiring
It also comes with a circuit diagram.
Unfortunately, there seem to be two versions of this project they sell on ebay, which can lead to some confusion also the PCB is a different size so won't fit the case.
The DIY electronic doorbell is also another great little kit, although it doesn't really sound like a doorbell more like a dying frog in an electric fence. There is an error on the circuit board as the 100uf (C5) is not labeled. Of course, you could use this for a doorbell or prank your friends by wiring it to a toilet seat, or locker door. It is an easy kit to assemble and you will also need a battery and it will work with 6-9 volts
Top 10 electronics projects for beginners 2024
If your wanting to get into electronics and need a place to start this instructable is for you. There are a number of very cheap kits on eBay and Aliexpress that you can get for 2 or 3 dollars which can give you some experience in component identification, soldering and fault finding. Some of the kits are better than others and they don't come with instructions, but the PCBs are usually well labeled, so you don't really need a step by step guide to assembling the circuits.
Learning Intentions and Success Criteria
Learning Intentions
To work safely in the workshop.
To research electronics and understand basic electronic circuits and components.
To operate a multimeter, soldering iron and hand tools.
To build and fault find simple electronic kits
To be a self-directed learner.
Success criteria
I understand the safety rules and I am working safely in the workshop.
I can follow the instructions independently.
I can produce a number of kit projects
I can safely use a soldering iron to solder PCBs correctly
I can find and repair a non-functioning circuit.
I can operate a multimeter, using the correct settings and measurement units.
Before you start it is very important that you be able to identify electronic components and understand if they are polarity sensitive and know how to read component values. You will also have to have good soldering skills, as many of the pins are very close together and poor soldering will ruin your project very quickly.
If you solder a component in the wrong place or around the wrong way your project will likely not work, or your component could be damaged.
Research can easily be done with a google search, here are some names to get you started. Draw up a grid in your folio with a row for each of the following
Resistor
capacitor
Transistor
PCB
IC. (555) (4017)
Microcontroller (1704)
IC socket
Switch
Trimpot
LDR
Inductor
Microphone.
Diode
Zener diode
In your grid, you need 5 columns for each of the following.
Name of component
photo
symbol
A brief description of how to read the components value.
Is it polarity sensitive, how can you tell which way around it fits into the PCB
You also need to think about making a case or cover for your project, this can be easily done with a laser cutter or 3D printer and a bit of thought. Check out my other Instructables which will show you how to use the laser cutter and 3d printer, and there are some examples of student case designs in the photos.
A good way to learn to solder is practicing on a piece of Vero board and some header pins.
Tips for well-soldered joins are.
Make sure the soldering iron is clean, melt a little solder on the tip and clean off with a wet sponge.
Soldering iron need to be up to temperature before you start. Use proper resin core 60/40 electrical solder. (Lead-free solder can be difficult to work with)
Heat the pad and the wire with the soldering iron Bring the solder in from the opposite side of the iron Melt the solder onto the pad and wire.
Avoid putting the solder directly on the soldering iron when soldering
Lots of practice.
Cut the excess wire after you have soldered a number of components in.
Always use sharp side cutters, and never pull or twist the wire to snap it off, the PCB can be easily damaged.
It is usually best to start with the components that will sit low on the PCB first and fit the tallest components last.
Start with the resistors, and either use a resistor color code chart or multi-meter to check the resistance value before fitting them to the board.
For some reason, many of my students get this wrong and end up with resistors in the wrong location, which can be very difficult to repair.
All the circuit board are very well labeled just keep an eye out for similar looking markings. eg 22K, 22R and 2K2 are NOT the same things. Also, some board are board may use a decimal point eg 2.2K and 2K2 are the same.
The LEDs can also be Labeled in different ways, so make sure you fit them the correct way around. They may have a + or - a diode symbol or a circle with a flat.
A flip-flop circuit is a basis for all sorts of electronic circuits, this one flashes two LEDs alternately. Its the perfect for your first project and can be modified to make the LEDs flash faster or slower. You could use the finished project for a model railway crossing, or tail light for a bicycle.
You will also need a battery and it will work with 3-9 volts
Parts List
2x LEDs
4x Resistors 2x 470R 2x10K
2x Capacitors 47uf
2x Transistors 9014
PCB
It also comes with a circuit diagram, but it's in Chinese and hard to read.
Photos show a simple laser-cut case, and a button cell and laser-cut switch were used to keep the size small. The laser-cut cases will be the subject for my next instructable
Unfortunately, the flip flop shown in the previous step has disappeared off the face of the earth, I can only assume that they are no longer produced.
The Sound activated LED her, Is a great beginner project, it has a microphone, and when there is a sound it flashes 5 super bright LED.
It only has a few components and is very easy to build and get working. You will also need a battery and it will work with 3-6 volts
Parts list
5x LEDs
3x Resistors 1M, 10K, 4.7K
2x 9014 transistors
2x capacitors 47uf, 1uf
1x Microphone
PCB
plug and wiring
It also comes with a circuit diagram.
Unfortunately, there seem to be two versions of this project they sell on ebay, which can lead to some confusion also the PCB is a different size so won't fit the case.
The DIY electronic doorbell is also another great little kit, although it doesn't really sound like a doorbell more like a dying frog in an electric fence. There is an error on the circuit board as the 100uf (C5) is not labeled. Of course, you could use this for a doorbell or prank your friends by wiring it to a toilet seat, or locker door. It is an easy kit to assemble and you will also need a battery and it will work with 6-9 volts
No comments:
Post a Comment