How to make 220v free energy with washing machine motor and fan motor

 How to make 220v free energy with washing machine motor and fan motor

In this instructable, I will teach you how to transform a 220 volts Blender motor into a powerful generator without any additional circuit.

Blender Motors are actually the universal Motors which are capable of operating at both AC or DC inputs.

The above Universal motor has four wires. Two wires both black in color are for the armature while the other two wires black and red are for the field.

Now take a laptop charger and measure its output voltage with a multimeter. I have used a 19 volts laptop charger though you can use any voltage range from 5 volts which is for a mobile charger to 20 volts which is usually for the laptop chargers.

Connect the two output wires from the laptop charger to the field wires of the universal motor irrespective of the polarity.

Once you do that, the winding field gets activated. Now take an inverter and connect it to the armature terminals of the Universal motor.

To the output 220 volts or 110 volts side of the inverter, connect the load bulb.

Now take the plastic thread and wound it around the shaft of the Blender (universal) motor.

After you completed the previous steps, all you have to do is hold the Universal motor with one hand and pull the plastic thread as fast as you can with your other hand.

 How to make 220v free energy with washing machine motor and fan motor

In this instructable, I will teach you how to transform a 220 volts Blender motor into a powerful generator without any additional circuit.

Blender Motors are actually the universal Motors which are capable of operating at both AC or DC inputs.

The above Universal motor has four wires. Two wires both black in color are for the armature while the other two wires black and red are for the field.

Now take a laptop charger and measure its output voltage with a multimeter. I have used a 19 volts laptop charger though you can use any voltage range from 5 volts which is for a mobile charger to 20 volts which is usually for the laptop chargers.

Connect the two output wires from the laptop charger to the field wires of the universal motor irrespective of the polarity.

Once you do that, the winding field gets activated. Now take an inverter and connect it to the armature terminals of the Universal motor.

To the output 220 volts or 110 volts side of the inverter, connect the load bulb.

Now take the plastic thread and wound it around the shaft of the Blender (universal) motor.

After you completed the previous steps, all you have to do is hold the Universal motor with one hand and pull the plastic thread as fast as you can with your other hand.