on video I make high speed water pump from a washing machine motor

 I make high speed water pump from a washing machine motor

Hello friends, today I will show you how to make a high flow water pump using an old washing machine motor. In the video I'm going to reuse 100mm PVC pipe and 150mm tube sheets - as they are thicker - for constructing the turbine plates. We use a 400W washing machine motor.

We also use plastic plates from LED screen and steel shaft.

The outlet pipe is 50mm, which will allow a large flow rate. We got a high flow centrifugal pump.

This water pump is particularly suitable for situations where you want to pump a large volume of water at a small height - approximately 80 cm.

If you are interested in science and technology, this is the channel you are looking for.

I hope you like the video.

 I make high speed water pump from a washing machine motor

Hello friends, today I will show you how to make a high flow water pump using an old washing machine motor. In the video I'm going to reuse 100mm PVC pipe and 150mm tube sheets - as they are thicker - for constructing the turbine plates. We use a 400W washing machine motor.

We also use plastic plates from LED screen and steel shaft.

The outlet pipe is 50mm, which will allow a large flow rate. We got a high flow centrifugal pump.

This water pump is particularly suitable for situations where you want to pump a large volume of water at a small height - approximately 80 cm.

If you are interested in science and technology, this is the channel you are looking for.

I hope you like the video.