Post Top Ad

Sunday, January 14, 2024

How to make 5 and 12 volt transformerless power supply??? || convert 220volt ac to 5v and 12v dc ||


 How to make 5 and 12 volt transformerless power supply??? || convert 220volt ac to 5v and 12v dc ||

In this video, I have explained how to calculate the resistance value for LEDs for different input voltage. It is very important to select the right series resistor before using a LED in a circuit otherwise the LED may burnout.


I will request you to watch the complete tutorial video of the LED Resistor calculation but you can also jump to any topic by click on the following Time Stamps:



00:34 How to identify forward voltage, current rating of LED from datasheet.

00:54 How to calculate resistance value for 9V input voltage (Ohm Law).

02:21 How to calculate the resistor wattage in the circuit.

04:59 How to select the resistance value for 12V input voltage.



In this video, I have shown how to identify the LED rating from the datasheet and from that rating how to calculate resistance value and wattage required to connect the LED in a circuit using ohm law for different input voltages. After calculating the resistance value we have practically measured the voltage and current value with a multimeter and compare it with the calculated data.

Here I have used a 3V led and calculated the resistance value in 9 volts and 12-volt circuit.



If you enjoyed the video please hit the like button and share it with your friends. For more such videos don't forget to SUBSCRIBE our channel and please do share your feedback in comment sections. Thank you for your support.


 How to make 5 and 12 volt transformerless power supply??? || convert 220volt ac to 5v and 12v dc ||

In this video, I have explained how to calculate the resistance value for LEDs for different input voltage. It is very important to select the right series resistor before using a LED in a circuit otherwise the LED may burnout.


I will request you to watch the complete tutorial video of the LED Resistor calculation but you can also jump to any topic by click on the following Time Stamps:



00:34 How to identify forward voltage, current rating of LED from datasheet.

00:54 How to calculate resistance value for 9V input voltage (Ohm Law).

02:21 How to calculate the resistor wattage in the circuit.

04:59 How to select the resistance value for 12V input voltage.



In this video, I have shown how to identify the LED rating from the datasheet and from that rating how to calculate resistance value and wattage required to connect the LED in a circuit using ohm law for different input voltages. After calculating the resistance value we have practically measured the voltage and current value with a multimeter and compare it with the calculated data.

Here I have used a 3V led and calculated the resistance value in 9 volts and 12-volt circuit.



If you enjoyed the video please hit the like button and share it with your friends. For more such videos don't forget to SUBSCRIBE our channel and please do share your feedback in comment sections. Thank you for your support.

No comments:

Post a Comment

Post Top Ad

Pages