TTP 223 touch sensor module project ll Touch sensor on off light ll

 TTP 223 touch sensor module project ll Touch sensor on off light ll

Description

The TTP223 is a touch pad detector IC replicating a single tactile button. This touch detection IC is designed to replace traditional direct button key with diverse pad size.

Features

1. Input Voltage: 3.3V - 5.5V DC

2. Module size: 15mm x 11mm

3. Stable touching detection of human body for replacing traditional direct switch key.

For this tutorial, we required these items:

1. TTP223 Touch Sensor Module (Capacitor)

2. 10mm LED (Yellow)

3. Resistor 220 ohm

4. Breadboard Power Stick 3.3V/5V

5. Li-Ion Rechargeable Battery 7.4V 1200mAh

Trigger setting mode: (1 = Short ; 0 = No Short)

Jumpers AB

Momentary / High Output 00 (used in this tutorial)

Self Lock / High Output 01

Momentary / Low Output 10

Self Lock / Low Output 11

Based on the results,

1. The LED will turn on when we touch the TTP223 Capacitive Touch Sensor Module.

2. If no touching is detected, the LED will turn off.

 TTP 223 touch sensor module project ll Touch sensor on off light ll

Description

The TTP223 is a touch pad detector IC replicating a single tactile button. This touch detection IC is designed to replace traditional direct button key with diverse pad size.

Features

1. Input Voltage: 3.3V - 5.5V DC

2. Module size: 15mm x 11mm

3. Stable touching detection of human body for replacing traditional direct switch key.

For this tutorial, we required these items:

1. TTP223 Touch Sensor Module (Capacitor)

2. 10mm LED (Yellow)

3. Resistor 220 ohm

4. Breadboard Power Stick 3.3V/5V

5. Li-Ion Rechargeable Battery 7.4V 1200mAh

Trigger setting mode: (1 = Short ; 0 = No Short)

Jumpers AB

Momentary / High Output 00 (used in this tutorial)

Self Lock / High Output 01

Momentary / Low Output 10

Self Lock / Low Output 11

Based on the results,

1. The LED will turn on when we touch the TTP223 Capacitive Touch Sensor Module.

2. If no touching is detected, the LED will turn off.