Post Top Ad

Sunday, December 31, 2023

on video Experiment 12v DC to 220v AC Inverter (using relay)


 Experiment 12v DC to 220v AC Inverter (using relay)

Today I am going to make an Inverter circuit using 12V Relay.


Materials required -


(1.) LED Bulb - 220V x1


(2.) Input power supply -12V DC / (12V Battery)


(3.) Transformer - 12-0-12 x1


(4.) Relay - 12V

This is the circuit diagram of this inverter. Connect all components according to circuit diagram.


Firstly we have to short two pins of Relay.


Solder Normally close (NC) Pin to Coil-1 pin of the Relay as solder

Next solder 0 Wire of Transformer to coil-2 pin of the Relay as you can see in the picture.


Next solder one 12-wire of transformer to NO pin of the Relay


And solder another 12-pin of the transformer to NC/Coil-1 pin of the Relay as you can

Next we have to solder LED Bulb to the output of the Transformer as shown in the picture.

Now we have to give input power supply to the circuit.


Connect +ve input power supply wire to the common pin of Relay and


Solder -ve input power supply wire to the NO pin of the Relay as you can see in the picture.


Result - LED will start glowing.


Like this we can make 12V Relay to Inverter.


 Experiment 12v DC to 220v AC Inverter (using relay)

Today I am going to make an Inverter circuit using 12V Relay.


Materials required -


(1.) LED Bulb - 220V x1


(2.) Input power supply -12V DC / (12V Battery)


(3.) Transformer - 12-0-12 x1


(4.) Relay - 12V

This is the circuit diagram of this inverter. Connect all components according to circuit diagram.


Firstly we have to short two pins of Relay.


Solder Normally close (NC) Pin to Coil-1 pin of the Relay as solder

Next solder 0 Wire of Transformer to coil-2 pin of the Relay as you can see in the picture.


Next solder one 12-wire of transformer to NO pin of the Relay


And solder another 12-pin of the transformer to NC/Coil-1 pin of the Relay as you can

Next we have to solder LED Bulb to the output of the Transformer as shown in the picture.

Now we have to give input power supply to the circuit.


Connect +ve input power supply wire to the common pin of Relay and


Solder -ve input power supply wire to the NO pin of the Relay as you can see in the picture.


Result - LED will start glowing.


Like this we can make 12V Relay to Inverter.

No comments:

Post a Comment

Post Top Ad

Pages