How to Make Chaser Light With IC || Running led light || Flip Flop led light

 How to Make Chaser Light With IC || Running led light || Flip Flop led light

Today I am going to make an LED Chaser circuit without using IC.This circuit is amazing and I will make this circuit using BC547 Transistor.This is Best LED Chaser circuit.

Firstly we have to connect emitter pins of all three transistors as solder in the picture.

Next we have to connect the capacitors to the transistors.

[Capacitor 1] - Solder -ve pin of 1st capacitor to Base Pin of 1st transistor and +ve pin to collector pin of 2nd transistor,

[Capacitor 2] - Solder -ve pin of 2nd capacitor to Base Pin of 2nd Transistor and +ve pin to collector pin of 3rd transistor and

[Capacitor 3] - Solder -ve pin of 3rd capacitor to Base Pin of 3rd Transistor as you can see in the picture.

Solder +ve pin of 3rd Capacitor to Collector pin of 1st Transistor using a wire as solder in the picture.

Next we have to connect 560 ohm resistor to the circuit.

Solder 560 Ohm resistors to all collector pins of the transistors as solder

Next connect 10K resistors to the circuit.

Solder 10K resistors to Base pins of all three transistors as soldered

Next connect all out wires of 10K resistors and 560 Ohm resistors to each other as you can see in the picture.

Now we have to connect -ve legs of all LEDs to each other as connected in the picture.

 How to Make Chaser Light With IC || Running led light || Flip Flop led light

Today I am going to make an LED Chaser circuit without using IC.This circuit is amazing and I will make this circuit using BC547 Transistor.This is Best LED Chaser circuit.

Firstly we have to connect emitter pins of all three transistors as solder in the picture.

Next we have to connect the capacitors to the transistors.

[Capacitor 1] - Solder -ve pin of 1st capacitor to Base Pin of 1st transistor and +ve pin to collector pin of 2nd transistor,

[Capacitor 2] - Solder -ve pin of 2nd capacitor to Base Pin of 2nd Transistor and +ve pin to collector pin of 3rd transistor and

[Capacitor 3] - Solder -ve pin of 3rd capacitor to Base Pin of 3rd Transistor as you can see in the picture.

Solder +ve pin of 3rd Capacitor to Collector pin of 1st Transistor using a wire as solder in the picture.

Next we have to connect 560 ohm resistor to the circuit.

Solder 560 Ohm resistors to all collector pins of the transistors as solder

Next connect 10K resistors to the circuit.

Solder 10K resistors to Base pins of all three transistors as soldered

Next connect all out wires of 10K resistors and 560 Ohm resistors to each other as you can see in the picture.

Now we have to connect -ve legs of all LEDs to each other as connected in the picture.