220 Volt AC To 6/12/24/48/300 Volt DC LED Driver Circuit || 100% Working ||
Hello, this circuit is a circuit where you can convert 220 volt AC voltage to different voltages, all the components used in the circuit are critical and make the circuit one by one, and do not touch it with bare hands while the circuit work. The circuit current is at the level of 50/100 ma, so the voltage itself collapses depending on the current consumed at the output.
today in this video i have shown how to make a mains isolated Transformerless Power supply.
Parts list:-
225j 400v pf capacitor
1m resistor
12v zener diode
1n4007 diode
100uf 25v capacitor
This video is educational purpose only.High voltage can damage your life. Some works can be dangerous. and for that, you don't risk and damage your self. I am professional in my work. So without knowledge don't try this
today in this video I have shown how to make a 220v to 12v converter circuit. Please note, this circuit is not isolated from mains so don’t touch any naked wire in this circuit when the circuit is plugged in.
If you want to increase the brightness of the led use 10W led and 2.2uf ceramic capacitor in place of 1uf. This capacitor must be rated 400v or above.
220 Volt AC To 6/12/24/48/300 Volt DC LED Driver Circuit || 100% Working ||
Hello, this circuit is a circuit where you can convert 220 volt AC voltage to different voltages, all the components used in the circuit are critical and make the circuit one by one, and do not touch it with bare hands while the circuit work. The circuit current is at the level of 50/100 ma, so the voltage itself collapses depending on the current consumed at the output.
today in this video i have shown how to make a mains isolated Transformerless Power supply.
Parts list:-
225j 400v pf capacitor
1m resistor
12v zener diode
1n4007 diode
100uf 25v capacitor
This video is educational purpose only.High voltage can damage your life. Some works can be dangerous. and for that, you don't risk and damage your self. I am professional in my work. So without knowledge don't try this
today in this video I have shown how to make a 220v to 12v converter circuit. Please note, this circuit is not isolated from mains so don’t touch any naked wire in this circuit when the circuit is plugged in.
If you want to increase the brightness of the led use 10W led and 2.2uf ceramic capacitor in place of 1uf. This capacitor must be rated 400v or above.
No comments:
Post a Comment