Post Top Ad

Monday, November 27, 2023

on video Local, Remote and DCS Start Stop Connection of DOL Starter ?


 Local, Remote and DCS Start Stop Connection of DOL Starter ?

    Welcome to another informative tutorial where we'll guide you how to wire a remote control for a DOL Starter so that we can turn the motor on and off from more than one location.

In this Video, we will learn how we can Start and Stop a Motor from two different Location (Local and Remote Wiring)

In this video we explain dol starter local and remote wiring connection with diagram, this type of wiring required when we need to control our motor from two different places ad we can select the start stop position by selecting selector switch. And control the motor.


The point which is near or on the starter is known as local point and the point which is far from the starter is known as remote wiring connection,

We explain this wiring connection very easy for more information just watch and learn

DOL Motor Starter with jogging circuit connection


What is a jog push button?

When it comes to motor controls, jogging is a method that uses short bursts of power in order to move a motor or a load into a needed or desired position. ...With the contacts from the selector switch open, the start button is then used as a momentary jog button.

Wiring and connection in a single phase direct online started (DOL) so that you can add remote stop start buttons. In this video we explain how to connects within a DOL starter and how to alter them to add a remote stop start button and then additional stop buttons. Explains overload connection 95, 96, 97 and 98 and adds a remote indicator lamp that will light up when the motor overload operates. This wiring diagram will help with level 3 electrical courses for both electrical apprentices, part time, full time learners.


 Local, Remote and DCS Start Stop Connection of DOL Starter ?

    Welcome to another informative tutorial where we'll guide you how to wire a remote control for a DOL Starter so that we can turn the motor on and off from more than one location.

In this Video, we will learn how we can Start and Stop a Motor from two different Location (Local and Remote Wiring)

In this video we explain dol starter local and remote wiring connection with diagram, this type of wiring required when we need to control our motor from two different places ad we can select the start stop position by selecting selector switch. And control the motor.


The point which is near or on the starter is known as local point and the point which is far from the starter is known as remote wiring connection,

We explain this wiring connection very easy for more information just watch and learn

DOL Motor Starter with jogging circuit connection


What is a jog push button?

When it comes to motor controls, jogging is a method that uses short bursts of power in order to move a motor or a load into a needed or desired position. ...With the contacts from the selector switch open, the start button is then used as a momentary jog button.

Wiring and connection in a single phase direct online started (DOL) so that you can add remote stop start buttons. In this video we explain how to connects within a DOL starter and how to alter them to add a remote stop start button and then additional stop buttons. Explains overload connection 95, 96, 97 and 98 and adds a remote indicator lamp that will light up when the motor overload operates. This wiring diagram will help with level 3 electrical courses for both electrical apprentices, part time, full time learners.

No comments:

Post a Comment

Post Top Ad

Pages