Today I am going to talk about a very useful project that I had taken up. It is called the Water Level Indicator. Nowadays everyone has overhead tank at their homes. But everyone who has a water tank above knows the kind of problems that they face. Firstly there is no system to track the water in the tank. Then there comes a secondary problem that is when their water pump is started they have no idea when it gets filled up and sometimes there are situation where the pump keeps on pumping water to the tank and the water starts spilling out from the tank. There is wastage of energy as well as wastage of water.
This project that I had taken up is the result of long hours of research of work at the Internet as well as long hours of thinking. I had made various versions of the projects earlier but at last I came up with this final product. I bet this has been tested and I can now firmly say that the model would work flawlessly without any complaints for years. I am saying this as I have installed this models to various houses in my neighborhood and all are working fine without any maintenance. And indeed this model is admired by all who use it.
The house where I live in has an overhead tank which is about 30 feet from the ground level. I was getting bored going up the rooftop to check whether the tank has filled or the water level was below to start the pump. I had to do this again and again. Then I sought for a solution. I always used to think of the possibilities of how this problem can be tackled in an electronic way. After years of research and by trial and error, I found one and wanted to put whatever I have done out here so that it might be helpful to someone who has an overhead water tank at their homes.
Today I am going to talk about a very useful project that I had taken up. It is called the Water Level Indicator. Nowadays everyone has overhead tank at their homes. But everyone who has a water tank above knows the kind of problems that they face. Firstly there is no system to track the water in the tank. Then there comes a secondary problem that is when their water pump is started they have no idea when it gets filled up and sometimes there are situation where the pump keeps on pumping water to the tank and the water starts spilling out from the tank. There is wastage of energy as well as wastage of water.
This project that I had taken up is the result of long hours of research of work at the Internet as well as long hours of thinking. I had made various versions of the projects earlier but at last I came up with this final product. I bet this has been tested and I can now firmly say that the model would work flawlessly without any complaints for years. I am saying this as I have installed this models to various houses in my neighborhood and all are working fine without any maintenance. And indeed this model is admired by all who use it.
The house where I live in has an overhead tank which is about 30 feet from the ground level. I was getting bored going up the rooftop to check whether the tank has filled or the water level was below to start the pump. I had to do this again and again. Then I sought for a solution. I always used to think of the possibilities of how this problem can be tackled in an electronic way. After years of research and by trial and error, I found one and wanted to put whatever I have done out here so that it might be helpful to someone who has an overhead water tank at their homes.
No comments:
Post a Comment