This video shows Submersible Pump Control Box Connection Wiring Diagram. A Submersible Water Pump runs to 220V ac line single phase. Using a capacitor to the coil connection. Water PumpPUMP the submersible pump should motor. single-phase line through the use of either a static or rotary phase converter.
In this video, you will see the step-by-step guide to connect an Electrical Control Box on a 1 Phase 4" Encapsulated Motor.
Steps:
1- Remove control box cover.
2- Install Control Box on the Wall.
3- Install conduits to protect the wires.
4- Prepare the cables to be connected. Note: Wire colors vary depending on the type of motor.
5- Connect the motor cables.
6- Connect the power line cables.
7- Place the cover back on.
Please remember before manipulating an electric water system to:
- Always read the manufacturer's product manual
- All electrical connections and checks must be done by a certified electrician and comply with applicable local standard
- Danger: electric shock risk. When Installing or adjusting an electrical system make sure that all plugs and cables are disconnected from the power outlet
- Installation of electrical water systems should be done by certified professionals
This video shows Submersible Pump Control Box Connection Wiring Diagram. A Submersible Water Pump runs to 220V ac line single phase. Using a capacitor to the coil connection. Water PumpPUMP the submersible pump should motor. single-phase line through the use of either a static or rotary phase converter.
In this video, you will see the step-by-step guide to connect an Electrical Control Box on a 1 Phase 4" Encapsulated Motor.
Steps:
1- Remove control box cover.
2- Install Control Box on the Wall.
3- Install conduits to protect the wires.
4- Prepare the cables to be connected. Note: Wire colors vary depending on the type of motor.
5- Connect the motor cables.
6- Connect the power line cables.
7- Place the cover back on.
Please remember before manipulating an electric water system to:
- Always read the manufacturer's product manual
- All electrical connections and checks must be done by a certified electrician and comply with applicable local standard
- Danger: electric shock risk. When Installing or adjusting an electrical system make sure that all plugs and cables are disconnected from the power outlet
- Installation of electrical water systems should be done by certified professionals
No comments:
Post a Comment