The working principle of the ATS (Automatic Transfer Switch) circuit
Automatic Transfer Switch, Get to Know the ATS Switch and Its Benefits
Automatic Transfer Switch, Get to Know the ATS Switch and Its Benefits. ATS is an abbreviation of the word Automatic Transfer Switch, if understood based on the meaning of the word, ATS is a switch that works automatically, but its automatic work is based on the possibility that if the electricity source from the PLN is cut off or experiences a blackout, the switch will move to another power source, for example, an inverter.
The Automatic Transfer switch is a full automatic power inverter switch control circuit with PLN. This tool is useful for turning on and connecting the power inverter to the load automatically when the PLN goes out.
When the PLN electricity returns, this tool will move the power source to the load from the power inverter to the PLN. In the development of technology, the electrical world has finally engineered this to be run automatically, which is abbreviated as ATS (Auto Transfer Switch) which is enabled automatically to transfer power according to needs without using human power to operate it.
Panel Type ATS (Automatic Transfer Switch)
ATS–AMF panels
This panel has a function as a system controller on or off the generator automatically. This means that when the main electricity has experienced a cut off at its power source, the control panel will automatically turn on the generator engine. And conversely, when the power is turned on again, the control panel will automatically be in the off position. In general, this AMF panel is combined with the ATS generator panel, which is often referred to as ATS – AMF.
In principle, ATS –AMF replaces the manual operator function for daily work so you don't have to bother turning the generator on or off. So that it can anticipate sudden PLN outages.
This panel has the function of controlling 2 sources of electricity which can be handled automatically and of course it is safe. This panel is very suitable for use in factories, offices, or homes that want their security system to move from the main power source to the power source automatically.
Benefits of ATS (Automatic Transfer Switch)
The use of this automation system has several advantages, including:
The system for moving from the PLN to the generator and vice versa only takes a very short time, it only takes seconds after the PLN goes out, the generator starts immediately and the user can immediately 'enjoy' electricity again.
It makes the electrician's job easier, even office buildings often don't have an electrician, with this ATS-AMF panel, everything becomes easy, the power goes out, the generator starts automatically, the PLN restarts, the generator stops itself, the technician doesn't have to run around because he's panicking just to quickly start the generator and pass the switch so that the activity wheels are not disturbed.
Providing protection for office equipment such as computers, air conditioners, factory and laboratory equipment, it often happens that the electricity voltage of the PLN or generator suddenly shuts down.
ATS Built Up Factory is Simpler
In the past, if we wanted to make an ATS, we assembled it into a panel box which consisted of many relays and contactors. Over time, many manufacturers have made ATS versions simple and easy to use by ordinary users.
This ATS model uses integrated relay and drive motor features and has high durability. The video below shows the ATS build up and how to assemble it.
The working principle of the ATS (Automatic Transfer Switch) circuit
Automatic Transfer Switch, Get to Know the ATS Switch and Its Benefits
Automatic Transfer Switch, Get to Know the ATS Switch and Its Benefits. ATS is an abbreviation of the word Automatic Transfer Switch, if understood based on the meaning of the word, ATS is a switch that works automatically, but its automatic work is based on the possibility that if the electricity source from the PLN is cut off or experiences a blackout, the switch will move to another power source, for example, an inverter.
The Automatic Transfer switch is a full automatic power inverter switch control circuit with PLN. This tool is useful for turning on and connecting the power inverter to the load automatically when the PLN goes out.
When the PLN electricity returns, this tool will move the power source to the load from the power inverter to the PLN. In the development of technology, the electrical world has finally engineered this to be run automatically, which is abbreviated as ATS (Auto Transfer Switch) which is enabled automatically to transfer power according to needs without using human power to operate it.
Panel Type ATS (Automatic Transfer Switch)
ATS–AMF panels
This panel has a function as a system controller on or off the generator automatically. This means that when the main electricity has experienced a cut off at its power source, the control panel will automatically turn on the generator engine. And conversely, when the power is turned on again, the control panel will automatically be in the off position. In general, this AMF panel is combined with the ATS generator panel, which is often referred to as ATS – AMF.
In principle, ATS –AMF replaces the manual operator function for daily work so you don't have to bother turning the generator on or off. So that it can anticipate sudden PLN outages.
This panel has the function of controlling 2 sources of electricity which can be handled automatically and of course it is safe. This panel is very suitable for use in factories, offices, or homes that want their security system to move from the main power source to the power source automatically.
Benefits of ATS (Automatic Transfer Switch)
The use of this automation system has several advantages, including:
The system for moving from the PLN to the generator and vice versa only takes a very short time, it only takes seconds after the PLN goes out, the generator starts immediately and the user can immediately 'enjoy' electricity again.
It makes the electrician's job easier, even office buildings often don't have an electrician, with this ATS-AMF panel, everything becomes easy, the power goes out, the generator starts automatically, the PLN restarts, the generator stops itself, the technician doesn't have to run around because he's panicking just to quickly start the generator and pass the switch so that the activity wheels are not disturbed.
Providing protection for office equipment such as computers, air conditioners, factory and laboratory equipment, it often happens that the electricity voltage of the PLN or generator suddenly shuts down.
ATS Built Up Factory is Simpler
In the past, if we wanted to make an ATS, we assembled it into a panel box which consisted of many relays and contactors. Over time, many manufacturers have made ATS versions simple and easy to use by ordinary users.
This ATS model uses integrated relay and drive motor features and has high durability. The video below shows the ATS build up and how to assemble it.
No comments:
Post a Comment