MOTOR AUTO CUT OFF switches off the water motor when the water tank gets full, in other words just switch your motor on with the green switch on device and forget, your motor will automatically get off when tank gets full.
A float switch is a mechanical switch that floats on top of a liquid surface. As the liquid level goes up or down, it moves vertically with the liquid level. This is a type of level sensor and this device is used to detect the level of liquid within a tank. And also float switch may be used to control a pump, as an indicator, an alarm, or to control other devices.
In this video, I have explained about float switch wiring connection to control a water pump.
What is a float switch?
A float switch detects the level of a liquid in a tank. Based on the water level, it will open or close an electrical circuit generally used to pump water in or out of the tank.
How to work a float switch?
A float switch moves with the liquid level up and down vertically. An internal mechanical switch opens or closes an electrical circuit with gravity. Therefore, the electrical circuit can turn on/off equipment, like a water pump.
What does a float switch do?
A float switch monitors the level of a liquid in a tank. It then opens or closes an electrical circuit based on the liquid level and wiring to control external components.
How to install a float switch?
A float switch is installed in a liquid tank. Firstly, a pre-set level is made and can be done with a counterweight. Then, based on a normally open or closed wiring configuration, it will open or close the electrical circuit based on its movement up or down with the liquid level.
How to wire a float switch?
A float switch is wired in either the normally open or normally closed position. A normally open position is open when down (low liquid level) and a normally closed position is closed when down. The open/closed position refers to the electrical circuit.
MOTOR AUTO CUT OFF switches off the water motor when the water tank gets full, in other words just switch your motor on with the green switch on device and forget, your motor will automatically get off when tank gets full.
A float switch is a mechanical switch that floats on top of a liquid surface. As the liquid level goes up or down, it moves vertically with the liquid level. This is a type of level sensor and this device is used to detect the level of liquid within a tank. And also float switch may be used to control a pump, as an indicator, an alarm, or to control other devices.
In this video, I have explained about float switch wiring connection to control a water pump.
What is a float switch?
A float switch detects the level of a liquid in a tank. Based on the water level, it will open or close an electrical circuit generally used to pump water in or out of the tank.
How to work a float switch?
A float switch moves with the liquid level up and down vertically. An internal mechanical switch opens or closes an electrical circuit with gravity. Therefore, the electrical circuit can turn on/off equipment, like a water pump.
What does a float switch do?
A float switch monitors the level of a liquid in a tank. It then opens or closes an electrical circuit based on the liquid level and wiring to control external components.
How to install a float switch?
A float switch is installed in a liquid tank. Firstly, a pre-set level is made and can be done with a counterweight. Then, based on a normally open or closed wiring configuration, it will open or close the electrical circuit based on its movement up or down with the liquid level.
How to wire a float switch?
A float switch is wired in either the normally open or normally closed position. A normally open position is open when down (low liquid level) and a normally closed position is closed when down. The open/closed position refers to the electrical circuit.
No comments:
Post a Comment