How to Make Wireless Tester using CD4017 ?
In this video, we are going to make a Wireless Voltage tester. We can check the voltage in any type of wire using this wireless tester.
How to Make AC Line Tester Using 4017 IC
Today I am going to make AC Tester circuit using 4017 IC. This circuit will show AC current without touching the surface of the wire.
Firstly we have to connect pins of the IC as pin-15, Pin-13 and pin-8 of the IC as you can see in the picture.
Next we have to connect Buzzer to the IC.
Solder +ve pin of Buzzer to Pin-9 and -ve to pin-8 of the IC as solder in the picture.
Next Solder +ve leg of LED to pin-1 and -ve to pin-8 of the IC as you can see in the picture.
Next we have to connect Antenna wire to pin-14 of the IC as solder in the picture.
Now we have to connect wires of the battery clipper.
Solder +ve wire of battery clipper to pin-16 of IC and
Solder -ve wire of battery clipper to pin-8 of the IC as connected in the picture.
Now this is the last step of this project in which we have to check the circuit.
Connect Battery to the Battery clipper and keep circuit around AC current flowing condutor then LED will glow and Buzzer will give sound.
How to Make Wireless Tester using CD4017 ?
In this video, we are going to make a Wireless Voltage tester. We can check the voltage in any type of wire using this wireless tester.
How to Make AC Line Tester Using 4017 IC
Today I am going to make AC Tester circuit using 4017 IC. This circuit will show AC current without touching the surface of the wire.
Firstly we have to connect pins of the IC as pin-15, Pin-13 and pin-8 of the IC as you can see in the picture.
Next we have to connect Buzzer to the IC.
Solder +ve pin of Buzzer to Pin-9 and -ve to pin-8 of the IC as solder in the picture.
Next Solder +ve leg of LED to pin-1 and -ve to pin-8 of the IC as you can see in the picture.
Next we have to connect Antenna wire to pin-14 of the IC as solder in the picture.
Now we have to connect wires of the battery clipper.
Solder +ve wire of battery clipper to pin-16 of IC and
Solder -ve wire of battery clipper to pin-8 of the IC as connected in the picture.
Now this is the last step of this project in which we have to check the circuit.
Connect Battery to the Battery clipper and keep circuit around AC current flowing condutor then LED will glow and Buzzer will give sound.
No comments:
Post a Comment