on video How To Make Clap Switch at Home | Simple Clap Switch Circuit Using BC547 Transistor

 Clapping Switch With BC547 Transistor

Today I am going to make a circuit of Clapping switch with BC547 Transistor.In Earlier We made clapping switch using LM555 IC.

This is the circuit diagram of this project.

Connect all components according to this circuit diagram.

Firstly we have to connect both transistors.

Solder Collector Pin of transistor-1 to Base pin of transistor-2 as solder in the picture.

Next we have to connect 47uf capacitor.

Solder -ve pin of capacitor to base pin of transistor-1.

Next Solder emmiter pin of transistor-1 to transistor-2 as solder in the picture.

Solder 10K Resistor to +ve pin of capacitor.

Now we have to connect battery clipper wire to the circuit.

Solder +ve wire of battery clipper to +ve leg of LED and

solder -ve wire of battery clipper to Emmiter pin of transistors as you can see in the picture.

And Connect Battery to battery clipper.

To activate LED Do Clap.

 Clapping Switch With BC547 Transistor

Today I am going to make a circuit of Clapping switch with BC547 Transistor.In Earlier We made clapping switch using LM555 IC.

This is the circuit diagram of this project.

Connect all components according to this circuit diagram.

Firstly we have to connect both transistors.

Solder Collector Pin of transistor-1 to Base pin of transistor-2 as solder in the picture.

Next we have to connect 47uf capacitor.

Solder -ve pin of capacitor to base pin of transistor-1.

Next Solder emmiter pin of transistor-1 to transistor-2 as solder in the picture.

Solder 10K Resistor to +ve pin of capacitor.

Now we have to connect battery clipper wire to the circuit.

Solder +ve wire of battery clipper to +ve leg of LED and

solder -ve wire of battery clipper to Emmiter pin of transistors as you can see in the picture.

And Connect Battery to battery clipper.

To activate LED Do Clap.