16,500 RPM - Reuse 12V Super High Speed DC Motor from DEAD CD-ROM
I am going to salvage a 12 volt high speed brushless DC motor from an old CD-ROM drive.
This motor is 20 years old and runs at a very high RPM of 16,500 at 12 volt DC input. This BLDC motor has a large number of poles and a very small core.
Moreover, the motor speed is so high that it can fly like a toy helicopter. I also lengthened the tree to make it more useful.
i will reuse a dead printing press motor as a generator rated at 24 volt dc fabricated
The brand name is Tokushu Denso and it is a servo motor. The maximum voltage generated by me was 30 volts DC and the maximum current I could produce was 15.5 amps.
It is a high rpm permanent magnet DC motor.
16,500 RPM - Reuse 12V Super High Speed DC Motor from DEAD CD-ROM
I am going to salvage a 12 volt high speed brushless DC motor from an old CD-ROM drive.
This motor is 20 years old and runs at a very high RPM of 16,500 at 12 volt DC input. This BLDC motor has a large number of poles and a very small core.
Moreover, the motor speed is so high that it can fly like a toy helicopter. I also lengthened the tree to make it more useful.
i will reuse a dead printing press motor as a generator rated at 24 volt dc fabricated
The brand name is Tokushu Denso and it is a servo motor. The maximum voltage generated by me was 30 volts DC and the maximum current I could produce was 15.5 amps.
It is a high rpm permanent magnet DC motor.
No comments:
Post a Comment