The machine is very helpful in making the widening of steel wheels, for the drive I used an electric motor with a gear, the engine speed was additionally reduced so that it was possible to weld not only with the mig method but also with the tig method. With such a widening of the wheels, work must be done very carefully, without haste, weld with high current to perform remelting. The wheel that I widened is much harder to widen than the regular wheel, but thanks to the rollers, I managed to make this wheel perfectly, the rollers help to center and align the wheel axis
The machine is very helpful in making the widening of steel wheels, for the drive I used an electric motor with a gear, the engine speed was additionally reduced so that it was possible to weld not only with the mig method but also with the tig method. With such a widening of the wheels, work must be done very carefully, without haste, weld with high current to perform remelting. The wheel that I widened is much harder to widen than the regular wheel, but thanks to the rollers, I managed to make this wheel perfectly, the rollers help to center and align the wheel axis
No comments:
Post a Comment