Because this circuit employs a direct power source that is not separated from the mains, it should only be used by those who are familiar with electricity or have electrical protection expertise. People who are knowledgeable about electricity or have electrical protection knowledge should apply this circuit. All operations please be careful
If you want to increase the brightness of the led use 10W led and 2.2uf ceramic capacitor in place of 1uf. This capacitor must be rated 400v or above.
this circuit is a circuit where you can convert 220 volts alternating voltage into different voltages, all the components used in the circuit are critical and make the circuit one to one, and don't touch it with your bare hands while the circuit is working. The circuit current is at the level of 50/100 ma, so the voltage itself collapses depending on the current drawn at the output.
Because this circuit employs a direct power source that is not separated from the mains, it should only be used by those who are familiar with electricity or have electrical protection expertise. People who are knowledgeable about electricity or have electrical protection knowledge should apply this circuit. All operations please be careful
If you want to increase the brightness of the led use 10W led and 2.2uf ceramic capacitor in place of 1uf. This capacitor must be rated 400v or above.
this circuit is a circuit where you can convert 220 volts alternating voltage into different voltages, all the components used in the circuit are critical and make the circuit one to one, and don't touch it with your bare hands while the circuit is working. The circuit current is at the level of 50/100 ma, so the voltage itself collapses depending on the current drawn at the output.
No comments:
Post a Comment