on video Hybl Turbines H16 Engine introduction - 3D animation

Industriegasturbinen von MAN Diesel & Turbo decken das Leistungsspektrum von 7-13 MW ab. Diese Animation erklärt ihr Arbeitsprinzip anhand der neuen MGT-Serie. Ein Zweiweller dient als mechanicscher Antrieb, während die Einweller-Variante zur Stromerzeugung konzipiert ist. Die Funktionsweise hat einige Gemeinsamkeiten mit Flugzeugtriebwerken.

Francis turbines are the most common water turbine in use today. They operate in a water head from 40 to 600 m (130 to 2,000 ft) and are primarily used for electrical power production. The electric generators that most often use this type of turbine have a power output that generally ranges from just a few kilowatts up to 800 MW, though mini-hydro installations may be lower. Penstock (input pipes) diameters are between 3 and 33 ft (0.91 and 10 m). The speed range of the turbine is from 75 to 1000 rpm. A wicket gate around the outside of the turbine's rotating runner controls the rate of water flow through the turbine for different power production rates. Francis turbines are almost always mounted with the shaft vertical to isolate water from the generator. 

Industriegasturbinen von MAN Diesel & Turbo decken das Leistungsspektrum von 7-13 MW ab. Diese Animation erklärt ihr Arbeitsprinzip anhand der neuen MGT-Serie. Ein Zweiweller dient als mechanicscher Antrieb, während die Einweller-Variante zur Stromerzeugung konzipiert ist. Die Funktionsweise hat einige Gemeinsamkeiten mit Flugzeugtriebwerken.

Francis turbines are the most common water turbine in use today. They operate in a water head from 40 to 600 m (130 to 2,000 ft) and are primarily used for electrical power production. The electric generators that most often use this type of turbine have a power output that generally ranges from just a few kilowatts up to 800 MW, though mini-hydro installations may be lower. Penstock (input pipes) diameters are between 3 and 33 ft (0.91 and 10 m). The speed range of the turbine is from 75 to 1000 rpm. A wicket gate around the outside of the turbine's rotating runner controls the rate of water flow through the turbine for different power production rates. Francis turbines are almost always mounted with the shaft vertical to isolate water from the generator.