What are the advantages, you can watch this video.
Radal05
tp4056 lithium cell charger module, tp4056 charging module, tp4056 module, tp4056 parallel charging, tp4056 power bank, tp4056 projects, tp4056 connection, tp4056 heating problem, tp4056 type c
This video explains the designation of a lithium battery charger with the TP4056 module. The price is very cheap, around Rp. 3000/pcs.
Besides being cheap, this module is very safe, because there is a current limiter. so whatever state the battery is including a short, the module will not be damaged.
To use this, use a minimum charger input of 1.2A, if it is less then the charging process will take longer.
The process in parallel with this module is also possible, it's just that the maximum current of 1A will definitely be divided in half, causing the charging process to be 2x slower.
TP4056 Charger Module
This is a kit for making DIY Powerbank, comes in a small size so it doesn't take up space. equipped with an LED indicator and a charging current that can be adjusted via a resistor.
SPECIFICATION
- Charging current: 1 Ampere (Adjustable)
- Type of Filling : Linear
- INPUT Voltage : 4.5V-5.5V
- IC : TC4056
- Accuracy : 1.5%
Indicators
- When charging : Red
- Fully charged : Green
- Reverse Polarity Protection : None
- Sockets: Mini USB
What are the advantages, you can watch this video.
Radal05
tp4056 lithium cell charger module, tp4056 charging module, tp4056 module, tp4056 parallel charging, tp4056 power bank, tp4056 projects, tp4056 connection, tp4056 heating problem, tp4056 type c
This video explains the designation of a lithium battery charger with the TP4056 module. The price is very cheap, around Rp. 3000/pcs.
Besides being cheap, this module is very safe, because there is a current limiter. so whatever state the battery is including a short, the module will not be damaged.
To use this, use a minimum charger input of 1.2A, if it is less then the charging process will take longer.
The process in parallel with this module is also possible, it's just that the maximum current of 1A will definitely be divided in half, causing the charging process to be 2x slower.
TP4056 Charger Module
This is a kit for making DIY Powerbank, comes in a small size so it doesn't take up space. equipped with an LED indicator and a charging current that can be adjusted via a resistor.
SPECIFICATION
- Charging current: 1 Ampere (Adjustable)
- Type of Filling : Linear
- INPUT Voltage : 4.5V-5.5V
- IC : TC4056
- Accuracy : 1.5%
Indicators
- When charging : Red
- Fully charged : Green
- Reverse Polarity Protection : None
- Sockets: Mini USB
No comments:
Post a Comment