on video free energy motor mini generator 12 volt bijalee janaretar diy

 First part of a small series of videos on this type of project.

Here it's just about the basics, and why, in theory, it can't work.
But I'm still going to test because it's tempting, watching their videos.

For the first tests I will just try to assemble elements that already exist, without modification.
In a second time I would modify the alternators in version with permanent magnets.
Here, the first tests with the material presented in the previous video.
For the moment, therefore, use of "off-the-shelf" equipment.
Nothing is suitable, the pulleys do not have the same diameter so the belt comes out of the engine pulley and is probably too tight so need more engine torque in my opinion.
For the next tests, I would pass on the notched belt of the distribution type, to avoid slipping.

 First part of a small series of videos on this type of project.

Here it's just about the basics, and why, in theory, it can't work.
But I'm still going to test because it's tempting, watching their videos.

For the first tests I will just try to assemble elements that already exist, without modification.
In a second time I would modify the alternators in version with permanent magnets.
Here, the first tests with the material presented in the previous video.
For the moment, therefore, use of "off-the-shelf" equipment.
Nothing is suitable, the pulleys do not have the same diameter so the belt comes out of the engine pulley and is probably too tight so need more engine torque in my opinion.
For the next tests, I would pass on the notched belt of the distribution type, to avoid slipping.