Electricians Matt and Joe look at the wiring and connection in a single phase direct online started (DOL). In this video we explains how to connect the supply and the out going load (motor) within in a DOL starter. Matt also explains the wiring for the overload plus the connection for the internal stop and start buttons. This wiring diagram will help with level 3 electrical courses for both electrical apprentices, part time, full time learners as well as AM2, AM2S and AM2E.
00:00 - Direct online starter connection
00:40 - 3 phase direct online on AM2 and AM2S
01:10 - Wiring diagram for a single phase DOL
01:29 - Parts of the drawing
01:54 - Line conductor
02:44 - Neutral conductor
04:32 - Start and stop buttons
04:47 - Retaining contacts 13 and 14
05:36 - 13 to the start button 17
06:00 - 14 to the start button 18
06:27 - Wiring up the stop button
07:15 - 95 and 96 normally close contacts
07:39 - 96 to A1
08:30 - Missing a conductor
08:54 - Common mistakes with the neural to A2
09:19 - 3 to A2 with the neutral
09:43 - Tracing the circuit
11:01 - How does the coil work
12:51 - Currents
13:30 - setting the overload
Videos are training aids for City and Guilds (C and G) and EAL courses Level 1, 2, 3 plus AM2, AM2S and AM2E.
Electricians Matt and Joe look at the wiring and connection in a single phase direct online started (DOL). In this video we explains how to connect the supply and the out going load (motor) within in a DOL starter. Matt also explains the wiring for the overload plus the connection for the internal stop and start buttons. This wiring diagram will help with level 3 electrical courses for both electrical apprentices, part time, full time learners as well as AM2, AM2S and AM2E.
00:00 - Direct online starter connection
00:40 - 3 phase direct online on AM2 and AM2S
01:10 - Wiring diagram for a single phase DOL
01:29 - Parts of the drawing
01:54 - Line conductor
02:44 - Neutral conductor
04:32 - Start and stop buttons
04:47 - Retaining contacts 13 and 14
05:36 - 13 to the start button 17
06:00 - 14 to the start button 18
06:27 - Wiring up the stop button
07:15 - 95 and 96 normally close contacts
07:39 - 96 to A1
08:30 - Missing a conductor
08:54 - Common mistakes with the neural to A2
09:19 - 3 to A2 with the neutral
09:43 - Tracing the circuit
11:01 - How does the coil work
12:51 - Currents
13:30 - setting the overload
Videos are training aids for City and Guilds (C and G) and EAL courses Level 1, 2, 3 plus AM2, AM2S and AM2E.
No comments:
Post a Comment