Hello friends, today in this video I have shown how to make a 220v to 12v converter circuit. Please note, this circuit is not isolated from mains so don’t touch any naked wire in this circuit when the circuit is plugged in.
If you want to increase the brightness of the led use 10W led and 2.2uf ceramic capacitor in place of 1uf. This capacitor must be rated 400v or above.
This is simple idea/tricks/circuit of electronics. You can make this circuit at your home easily. To make this circuit you might need this type of electronics parts. This parts name have to been give below.
Equipment :
1. Capacitor - 470uf/ 35 Volt
2. Diode - 4007
3. Mylar Capacitor (105 K/ 250 Volt)
4. Resistor - 470k/ ohm (2 Watt)
5. Zener Diode - 12 Volt
6. Soldering Iron
7. Digital Meter
8. Connection Wire/ Cable
9. LED 12 Volt - 10 Watt
Hello friends, today in this video I have shown how to make a 220v to 12v converter circuit. Please note, this circuit is not isolated from mains so don’t touch any naked wire in this circuit when the circuit is plugged in.
If you want to increase the brightness of the led use 10W led and 2.2uf ceramic capacitor in place of 1uf. This capacitor must be rated 400v or above.
This is simple idea/tricks/circuit of electronics. You can make this circuit at your home easily. To make this circuit you might need this type of electronics parts. This parts name have to been give below.
Equipment :
1. Capacitor - 470uf/ 35 Volt
2. Diode - 4007
3. Mylar Capacitor (105 K/ 250 Volt)
4. Resistor - 470k/ ohm (2 Watt)
5. Zener Diode - 12 Volt
6. Soldering Iron
7. Digital Meter
8. Connection Wire/ Cable
9. LED 12 Volt - 10 Watt
No comments:
Post a Comment