Relay vs Transistor - Difference between Relay and Transistor
A Relay is an electrically operated switch. Relays are usually used in automatic control circuit, as a kind of automatic switch which uses small current to control the large current load. Therefore, it plays the role of automatic regulation, safety protection, and conversion circuit etc.
A transistor is a kind of solid semiconductor device, which has many functions such as detection, rectification, amplification, switch, voltage stabilization, signal modulation and so on. As a variable current switch, transistor can control output current based on input voltage.
Relays and transistors have a similar basic function, that is, both play roles of electronic switches. However, relays and transistors are very different from each other. Now let’s take a quick peek at the differences between relays and transistors.
Different load types, voltage and current parameters
The transistor can only be connected to DC load, while the relay can be connected to AC and DC load. Relays consume a large amount of current in the switching-on state, and most transistors do not. However, the relay has much better current rating than the transistors.
Applications
Transistor is generally used at high-frequency speed, such as temperature PID control, stepper motor control, servo control and solenoid valve control. The transistor is mainly used for positioning control and emit pulses with the output of the crystal.
Relays cannot emit pulses, so they cannot be used for positioning control. If the relay is used for positioning control of the stepper or servo motor, the positioning module will be added. In fact, it is not economical. However, servo system can be controlled just by using a transistor output.
Other differences
Relays are isolated from the control coil. Transistors can be, but are often not isolated from the base, gate or trigger.
Under rated working conditions, relays have operating life, while transistors are only aging without limit on the number of times of use.
Relay vs Transistor - Difference between Relay and Transistor
A Relay is an electrically operated switch. Relays are usually used in automatic control circuit, as a kind of automatic switch which uses small current to control the large current load. Therefore, it plays the role of automatic regulation, safety protection, and conversion circuit etc.
A transistor is a kind of solid semiconductor device, which has many functions such as detection, rectification, amplification, switch, voltage stabilization, signal modulation and so on. As a variable current switch, transistor can control output current based on input voltage.
Relays and transistors have a similar basic function, that is, both play roles of electronic switches. However, relays and transistors are very different from each other. Now let’s take a quick peek at the differences between relays and transistors.
Different load types, voltage and current parameters
The transistor can only be connected to DC load, while the relay can be connected to AC and DC load. Relays consume a large amount of current in the switching-on state, and most transistors do not. However, the relay has much better current rating than the transistors.
Applications
Transistor is generally used at high-frequency speed, such as temperature PID control, stepper motor control, servo control and solenoid valve control. The transistor is mainly used for positioning control and emit pulses with the output of the crystal.
Relays cannot emit pulses, so they cannot be used for positioning control. If the relay is used for positioning control of the stepper or servo motor, the positioning module will be added. In fact, it is not economical. However, servo system can be controlled just by using a transistor output.
Other differences
Relays are isolated from the control coil. Transistors can be, but are often not isolated from the base, gate or trigger.
Under rated working conditions, relays have operating life, while transistors are only aging without limit on the number of times of use.
No comments:
Post a Comment